Check the Fire alarm System according to International Standards
Providing inspection and maintenance services for fire alarm systems according to international standards by a team of professional engineers. Confident in safety in every situation. Guaranteed work quality with free consultation and advice. Issue a certification report with recommendations for solutions and improvements.
Check + Test
Fire alarm control cabinet
Checking the electrical system and power supply — Checking the sensor system and connecting devices — Checking the program and system settings — Checking the structure and cleanliness of the control cabinet — Recording data and providing advice
Our tools and equipment are calibrated to ISO 17025 standards.
Fire Alarm Control Panel
Control Panel
Check the readiness of the main and backup electrical systems, including batteries, for continuous power supply. Check the wiring inside the cabinet to be neat and safe from short circuits, and measure the voltage and current values to be in accordance with the standards.
“Check the operation of the alarm sensor, siren and all connected devices. Test the signal transmission to be correct and fast. Check the display and warning signal when an abnormality occurs. Test the system reset to ensure its operation.”
Record inspection results and create a summary report of the system's operating status.
Function Test & Cleaning
Function of the fire alarm system
Check the wiring of the Mainboard, Cards, and Terminals for correctness. Measure voltage and current both VAC and VDC. Check the condition of the battery terminals and power supply efficiency. Also, check the status LEDs and control buttons. Test the function of the fire alarm system and clean the control cabinet to ensure it is always ready for use.
Maintenance of fire alarm equipment
The fire alarm suddenly sounds by itself? Another common cause of fire alarm malfunction is often caused by the fire alarm not being cleaned, causing a lot of dust to accumulate, or insects or spiders entering the device, damaging it and causing it to malfunction.
“Attention to every detail to ensure that the customer’s fire alarm equipment works at its best efficiency. Disassemble equipment for cleaning and visual inspection.”
Regular maintenance of fire alarm equipment can effectively reduce the risk of fire accidents.
Heat Detector
Heat Detector
Check the sensor operating values (Sensitivity Setting), temperature response (Response Time) and test the circuit connection (Circuit Integrity) to ensure that the device works according to international standards, is safe and ready to use in all situations.
“Heat detectors are very important in fire prevention because they can detect rapid temperature changes in the area, which may indicate a fire or abnormal heat. The heat detector will send an alarm signal to the control system to respond immediately.”
Rapid containment of incidents reduces damage to life and property.
Smoke detector
Smoke detector
Checking your smoke detector to ensure it’s still operational — Smoke detectors work by measuring the intensity of smoke particles as they pass through a sensing chamber using photoelectric or ionization technology. Therefore, checking their sensitivity is very important.
“Regular sensor response and connection to the control panel will help the alerts to be fast and accurate, reduce false alarms and be ready for emergency use.”
To ensure that the device can accurately detect smoke particles at an early stage and quickly send out an alarm signal in accordance with international standards.
Fire Alarm System Checklist
Scope of Support
SERVICES | CLEAN | CHECK |
|---|---|---|
Check fire Alarm Control Panel, status, Function. | ||
Check Smoke Detector | ||
Check Heat detector | ||
Check Fire Alarm (Combination Box) | ||
Check Manual Station | ||
Check Projected Beam Detectors | ||
Check and test sound and loudness of fire alarm (Bell). | ||
Check electrical system, leaks | – | |
Check Battery 24 VDC and Battery Charger. | ||
Check lamp and LED Lamp device. | ||
Check condition of FCP – Control Panel |
PM REPORTING | THAI | ENGLISH |
|---|---|---|
Issue fire alarm check and test report | NO |
In green check mark as above chart , that mean our scope of work without additional cost. In different may be certain some conditions. Customers can direct contact our staff before take a services.
Get now >
Choose the service that suits you best.
A complete fire alarm system inspection service that allows you to choose the service that is most suitable for your business.
Contact Support Safesiri Tel. (065) 441 9324
Annual inspection of fire alarm system.
Issue a report certifying the inspection by an engineer with recommendations for safe improvement.
Maintenance (PM).
Clean the control cabinet and fire alarm equipment to ensure they are ready for use at full efficiency.
Repair, Fix
Fix broken fire alarm signals, replace equipment, and set the system to be ready for use as before.
Check the fire alarm system to international standards
Engineering Institute of Thailand (EIT) Standards
NFPA (National Fire Protection Association) standards
Approved for Certification
Official license of a legal entity authorized to provide inspection and certification services for machinery, cranes, boilers.
Council of Engineers
Professional Engineer, Legal Entity Type, from the Engineering Council
Department of Welfare
Licensed legal entity authorized for machinery, crane, and boiler inspection and certification.
Support / ContactTel : (065) 441 9324
